ENGLISH - 7
3. How to assemble dish (reflector)
To avoid cable damage, fix LNB cable and auto skew cable as enlarged image
on following page.
※
Step 1 :
Step 2 :
Step 3 :
Press POWER button on the controller to turn on the unit and press OK button on
any satellite
When reflector bracket is lifted up to vertical direction(about 90 degrees), turn
the unit off
Connect the reflector to the reflector bracket
Step 4 :
Step 5 :
Step 6 :
Combine LNB arm with reflector bracket
Connect LNB cables and auto skew cable to the connector on the body, and cover
the connectors on both sides with waterproof cap for protection
Align LNB cables on the body using cable clamps
Step 7 : Power on and check the installation is completed by selecting HOME position
Connect LNB cable to body
and align using cable clamp.
Reflector bracket is connected to
the reflector
LNB arm is connected to
reflector bracket
