YRH
Coal Mining Infrared Camera
25
5.3 Adjust the camera
5.3.1 Focus
Point the camera to the target and turn the focus ring until you get
a sharp image.
Turn the focus ring
5.3.2 Image adjustment
(applicable to “Null” and “Menu” status)
In “Null” or “Menu” status, press the key “A”, and YRH will
automatically adjust the obtained image according to the setups
under the Setup-Image submenu to achieve the optimum effects.
In other statuses, if it is required to save the current analysis status
and adjust, press the key “A”. Now “Null” is displayed on the status
bar. Then press the key “A” again or manually adjust the image. If it is
required to adjust the image without saving the current analysis
status, press the key “C”. Now the current analysis status is cleared
and “Null” is displayed on the status bar. Press the key “A” again or
manually adjust the image.
