YRH
Coal Mining Infrared Camera
6
In the normal working condition
，
press this key to pop up a Windows
style menu and now the camera is in the menu mode.
In Menu mode, select the options of the Menu by pressing the key
“
△
+
” or “ ” (up or down). Press the key “ ”(right), the pull-down
menu of the corresponding Menu options will be displayed. Then
press the key “
△
+
” or “ ”(up or down) to select an option of the
pull-down menu. Press the Menu(enter) key to enter the selection.
After startup, press the Menu key
②
to pop up a pull-down menu.
Press this key when selecting an option, and a sub-menu will be
displayed if there is any, or to enter the selection if there is no
sub-menu.
Direction keys “ ”
，
“ ”
，
“
△
+
” and “ ”
：
The keys “ ”
，
“ ”
，
“
△
+
” and “
” are the keys Left, Right, Up
and Down in turn. They are used to select the options of the menu, to
move the spots, lines and areas in Analysis mode, to select and set
the parameters in Parameter Setup mode, to zoom in or out the
analyzed area in Area Analysis mode in Non-Menu mode. (Detailed
operation instructions referred to Chapter 5).
On Menu mode, press the k
ey “ ”(right), a pull-down menu will
be displayed. Use the keys “
△
+
” and “ ”(up and down) to select the
options on the menu; and the keys “
△
+
” and“ ”(up and down) to set
the value of the selected items.
In addition, in Non-
Menu mode, besides the key “A”, which can
automatically adjust Level and Span, the user may also use the
Direction key to manually adjust Level and Span. “
△
+
”or“ ”to adjust
Span, and “ ” or “ ” to adjust Level.
