7
sun or at other intense heat source which could
damage the detector of the IR camera.
Avoid Condensation Related Problems
Moving the IR camera rapidly between hot
and
cold
temperatures
may
cause
condensation (water droplets) on its external
and internal surfaces.
You can avoid this by placing the IR camera in
the plastic case (bundle) and letting it adjust to
temperature changes slowly before removing
it from the case.
If Condensation Forms Inside the IR Camera
Stop using the camera immediately. Continuing to
use the camera may cause damage. Remove the
SD card, and battery or a household power source,
from the IR camera and wait until moisture
evaporates completely before resuming use.
Extended Storage
When not using the IR camera for extended
periods of time, remove the battery from the IR
camera or battery charger and store the IR
camera in a safe place. Storing the IR camera for
extended periods with battery installed will run
down the battery.
Right Reserved
SATIR reserves the right to change the functions
and configurations of our products without prior
notice.
Summary of Contents for HotFind-S
Page 7: ......
Page 36: ...30 Area analysis Line analysis Isotherm analysis Image Media Settings ...
Page 59: ...53 ...
Page 94: ...88 ...