page 2
Manual SA 235
PCG/PC SA 235 Manual 14-03-2012
General
Thank you for purchasing this waterproof SATEX precision weighing scale !
This scale is equipped with reliable technology and has user friendly operational software.
You will use it many times and it will prove itself to be an easy, very speedy and accurate tool.
If any questions raise that are not described in this manual, please address yourselves to your SATEX supplier,
have a look at our website : www.satex.nl or send your questions per email to : [email protected]
Application, waterproof, HACCP
The water resistant SA 235 precision scale is designed for :
- use in wet and damp condtions
- very accurate (high resolution reading) and very fast weighing
- check weighing with 2 settable weight margins
- counting pieces
The scale may be used without problems in very humid and moist conditions.
The scale fulfils the requirements of Norm EC 60529:2001, sealed to IP 67: submerged in clean water during
1 hour at a depth of 1 m, penetrating water will not cause malfunctions.
The stainless steel exterior of the scale is designed according to the HACCP principles for food safety.
The SA 235 is designed for internal weighing only. The use of the scale is not permitted for commercial purposes.
Safety
Please read this manual thoroughly before start using the scale.
The supplier does not accept any responsibility if the guidelines of this manual are not observed.
Before any work is done on the scale, power connections from the mains adaptor and the internal battery
should be interrupted. Warranty is void if the scale is opened anyhow.
The instrument fulfils the requirements laid down in the EG regulations 89/336/EWG and 73/23/EWG for
electromagnetic compatibility.
Exceeding of the maximum values, laid down in these regulations, must be avoided.
The instrument is isolated according to class 2:
Electrostatic discharges may cause fatal damage to the scale and should be avoided at all times.
A.o. a proper earth connection of the scale and the place of erection is required in such cases.
In case the 230 V excitation cable is damaged, or the scale is not working with the 230 V connected, the
scale should not be used any longer and sent for service to your supplier.
The built in sealed lead battery should, if it has to be replaced, be disposed off as small chemical waste,
not to be added to normal waste.
Maintenance
Except from regular cleaning with a slightly humid cloth and a not aggressive detergent, further maintenance
is not required.
However it makes sense to check the scale’s weighing accuracy with regular intervals, using accurate calibration
weights of class M1 at least. The scale may be adjusted by the user itself using accurate class M1 weights.
(see: Adjusting the scale)
WEEGTECHNIEK HOLLAND B.V.
Website www.satex.nl
Tel +31 36 522 20 30
Patroonsweg 23
Email [email protected]
Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands