24048 INSTRUCTION- ASPEN II
10
10-5-21 REV A
7. INSTALL SHELF & VENT PIPE
• Slide shelf #
23832
on vent pipe
#14133
with flat surface up.
• Push Vent Pipe
#14133
up through roof and pull down into collar of tank vent hole (flat surface
of shelf facing up).
• Install (1) Screw
#18098
into dimple on tank collar through vent pipe wall using #2 PHILLIPS
DRIVER BIT. Be sure the screw penetrates the vent pipe to hold it securely.
• Locate shelf on vent pipe up 40 inches from top of tank to top flat surface of shelf. Shelf should
be centered with rear corner of unit.
• Transfer drill through 2 pre-drilled holes in bottom of shelf collar (left & right side) into vent pipe
using
#10 or (3/16”) DRILL BIT.
• Rivet shelf with (2) Rivets #22604.
TWIST & PUSH
9
10
23
(2)
25
