SATELLINE-M3-R3
Integration Guide, Version 1.6
30
RadioProperty
SL%E=x
Set Error check and Full CRC16 check modes.
Value of x is:
"0" Error check off
"1" CRC8 Partial
"2" CRC8 Full
"3" CRC16 Full
"OK" or "ERROR"
RadioProperty
SL@F?
Get noise level of radio channel
"-xxx dBm"
RadioProperty
SL@R?
Get RSSI (Received Signal Strength Indication)
of last received message (dBm)
”-nnn dBm”, nnn is a
decimal value of field
strength between –80 dBm
and –118 dBm.
Value is available 7 s after
reception, after that the
response is "<-118 dBm".
SATELLINE-3AS Epic
returns the stronger value
of two receivers.
RadioProperty
SL@S?
Get radio compatibility mode
"0" = Satel 3AS
"1" = Option 1 (PacCrest
4-FSK)
"2" = Option 2 (PacCrest
GMSK)
"3" = Option 3 (TrimTalk
GMSK)
RadioProperty
SL@S=x
Set radio compatibility mode. Value of x is:
0 = Satel 3AS
1 = Option 1 (PacCrest 4-FSK)
2 = Option 2 (PacCrest GMSK)
3 = Option 3 (TrimTalk GMSK)
"OK" or "ERROR"
RadioProperty
SL@T?
Get current signal threshold (dBm)
"-nnn dBm" (for example "-
80 dBm" or "-112 dBm")
RadioProperty
SL@T=-nnn
Set minimum power level of signal to be
received (=Signal Threshold level)
Value of nnn is decimal value [80...118] in
dBm
"OK" or "ERROR"
Reset
SL@X=n
Reset command. Values of n are:
"1" Reset BT (applies only to 3AS-OEM11)
"9" Reset module
Module resets required
blocks
