Satel SATELLINE-3AS/TC, User Manual, Page: 10 / 11

ANNEX to SATELLINE-3AS User Guide
SATELLINE-3AS/TC
02.12.2004 (v.1.0)
Page 10 of 11
SATEL Oy, P.O.Box 142, FIN-24101 Salo, Finland
Street: Meriniitynkatu 17, FIN-24100 Salo, Finland
Tel: +358 2 777 7800, Fax: +358 2 777 7810, E-mail: info@satel.fi
www.satel.fi
4 HEADER INTERFACE
4.1 Header Connector
SATELLINE-3AS/TC - HEADER CONNECTOR PINOUT
Type of the connector: 32-pin male Eurocard connector, type B
Pin# Signal Name In/Out Level Description
A1 GND - GND
A3 PWR_ON In 0..+14VDC
Radio modem On/Off control
( OFF = 0...+0.7VDC, ON = higher than +2.0VDC).
A6 PROG In 0..+14VDC Must be normally UNCONNECTED or higher than +3.0 VDC
Connect to ground in order to: a) access the setup menu
b) update the program flash
A14 PWR_LED Out High Z / +5V POWER LED anode
A15 RD_LED Out High Z / +5V RD LED anode
A17 GND - GND
A23 PWR_IN In + 6.0..14VDC Power Supply
A24 PWR_IN In + 6.0..14VDC Power Supply
A25 FLASH In 0..+14VDC Must be normally UNCONNECTED. Connected to PWR_IN in order to
enter the FLASH bootmode programming.
A31 RSSI Out 0..+4.5VDC RSSI analog output (option)
B1 GND - GND
B3 TX_A In RS-232
Data FROM terminal unit TO radio modem Port 1
B5 RTS_A In RS-232 Request To Send FROM terminal unit. Radio modem ignores this.
B8 RX_A Out RS-232 Data TO terminal unit FROM radiomodem Port 1
B9 CTS_A Out RS-232
Clear To Send. This signal indicates that radiomodem is ready to receive
data FROM terminal unit.
B11 TX_B In RS-232
Data FROM Hiper TO radio modem Port 2
B13 RTS_B In RS-232 Request To Send FROM terminal unit. Radio modem ignores this.
B16 RX_B Out RS-232 Data TO terminal unit FROM radio modem Port 2
B17 CTS_B Out RS-232 Clear To Send. This signal indicates that radiomodem is ready to receive
data FROM terminal unit.
B24 GND - GND
A1
B1
A32
B32
Outside view of the header connector.