Satel SATEL-TR49, Integration Manual

Page: 21 / 49

SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
20
4.2 Pin order of the DTE connector
Direction IN is data from DTE (Data Terminal Equipment) to the radio transceiver module.
Direction OUT is data from the radio module to the DTE.
The equivalent I/O schematic figures are shown in the next chapter.
Pin No. Equivalent
I/O
Schematic Signal
name
Type Direction Pin State Description
1,2 Figure 1 VCC_IN POWER IN External Voltage DC input
3,4 - GND GND - External Ground Ground reference for
power and signals
5 Figure 2 VCC_IO POWER IN External Voltage Device IO driver input
6 Figure 7 ENA_MOD IO IN Internal Pull
Down
Module ENA pin
7 Figure 3 RD1 CMOS OUT Output Driver Receive data, active low.
8 Figure 3 CTS1 CMOS OUT Output Driver Clear To Send, active
low.
9 Figure 6 TD1 CMOS IN Internal Pull Up Transmit Data, active
low.
10 Figure 6 RTS1 CMOS IN Internal Pull Up Ready to send, active
low.
11 Figure 4 GPIO1 CMOS OUT Internal Pull
Down
Reserved for future use.
12 Figure 4 GPIO2 CMOS OUT Internal Pull
Down
Reserved for future use.
13 Figure 6 GPIO3 CMOS IN Internal Pull Up Reserved for future use.
14 Figure 6 GPIO4 CMOS IN Internal Pull Up Reserved for future use.
15 Figure 5 STAT CMOS OUT Output Driver Various sequences
(section 4.6).
16 Figure 6 GPIO5 CMOS IN Internal Pull Up Reserved for future use.
17 Figure 6
SERVICE
CMOS IN Internal Pull Up Input for service access,
active low. See separate
section of the manual
(section 4.5).
18 Figure 4 GPIO6 CMOS OUT Internal Pull
Down
Reserved for future use.
19 Figure 4 GPIO7 CMOS OUT Internal Pull
Down
Reserved for future use.
20 Figure 4 GPIO8 CMOS OUT Internal Pull
Down
Reserved for future use.