SATELLINE-3AS
User Guide, Version 2.3
74
9.2.2 Changing radio settings (transmitter power and receiver sensitivity)
Press
ý
ori
þ
until
the cursor > points
to “Radio settings”
selection and press
”SELECT” to move
on to the submenu.
RF frequency
>Radio settings
Addressing
Port 1
Port 2
Handshaking
Additional
Tests
Factory setup
Contrast
EXIT ýþ SELECT
Press
ý
or
þ
until the
cursor > points to
the setting to be
modified and press
”CHANGE”.
>TX level
Sig. Threshold
TX start delay
BACK þ Change
MODIFYING TRANSMITTER OUTPUT
POWER:
The displayed list consists off all possible
values of transmitter output power. Press
ý
or
þ
until the cursor > points to the
desired value and press ”SET”.
NOTE: The starting position of the cursor
indicates the previously set value.
>10mW
20mW
50mW
100mW
200mW
500mW
1000mW
CANCEL þ SET
MODIFYING RECEIVER SENSITIVITY:
The displayed list consists off all possible
values of receiver sensitivity. Press
ý
or
þ
until the cursor > points to the desired
value and press ”SET”.
NOTE: The starting position of the cursor
indicates the previously set value.
min
>-118 dBm
-117 dBm
.
.
-81 dBm
-80 dBm
max
CANCEL ýþ SET
MODIFYING THE TRANSMIT START
DELAY:
The display will show the current value of
the delay. Press ”SET” to modify the value.
TX start delay
Current value:
0 ms
CANCEL ýþ SET
Press
ý
or
þ
until the first digit of the value
has reached the desired value and then
press ”NEXT” to move on to the next digit.
TX start delay
>00000
^
CANCEL ýþ Next
Repeat the above described five (5) times.
:
:
Press
ý
or
þ
until the last changeable digit
has the desired value and finally confirm
changes by pressing ”SET”.
TX start delay
>01234
^
CANCEL ýþ SET
