SATEL
INT-TSH2
29
The functions that can be available on the “Settings” screen are described below.
tap to change your code.
tap to change your telephone code.
tap to change the normal prefix. The function available to the administrator.
tap to change the duress prefix. The function available to the administrator.
tap to set the time of reminding about the need to change the prefix. The function
available to the administrator.
tap to set the control panel clock.
tap to enable/disable the CHIME in the keypad.
tap to block/unblock the zone violation signaling on “11: Chime” type outputs for
selected partitions.
tap to change the timer settings.
tap to change the settings of temperature thresholds and hysteresis for
“120: Thermostat” type outputs. The function available in the INTEGRA Plus control
panel.
tap to configure the partition timer.
tap to temporarily disable the expansion module tamper supervision.
tap to specify whether the installer is to have access to the alarm system.
The function available to the administrator.
tap to specify whether the installer can add / edit / remove users. The function
available to the administrator and applies to his/her object.
tap to specify whether the installer can arm/disarm the system, clear alarms and
bypass zones. The function available to the administrator and applies to his/her
object.
tap to specify whether the alarm system can be configured by means of the
DLOADX program even if the installer has no access to the alarm system.
The function available to the administrator.
tap to enter the address of the computer on which the DLOADX program is
installed. You can enter the IP address or domain name.
tap to enter the address of the computer on which the GUARDX program is
installed. You can enter the IP address or domain name.
tap to reset the GSM phone of the control panel. The function available in the
INTEGRA 128-WRL control panel.