The INT-KSG keypad is provided with touch keys and a large display which enables
presenting functions in four lines after entering the menu. The dynamic menu adjusts
automatically to the user's authority level and the system configuration. When in the
screensaver mode, the display can show a wide array of information in a customized form.
The new alarm system control feature (macro commands), specially created for the keypad,
enables a variety of functions to be called quickly and easily just by touching a few keys.
The keypad with firmware version 1.02 is dedicated to operating and programming the
INTEGRA (firmware version 1.11 or newer) and INTEGRA Plus control panels. For
programming of keypads with firmware version 1.02, the D
LOAD
X program version 1.11 or
newer is required.
1. Features
Large display with backlight.
LEDs indicating the state of partitions and system.
Touch keypad with backlighting:
12 keys, designated according to the telephone standard, for entering data and quick
access to some functions;
key (identical to the key);
4 keys to navigate through menu;
3 keys to trigger alarms from the keypad;
4 keys to call macro commands: .
Built-in sounder.
2 programmable hardwired zones:
support for NO and NC type detectors, as well as roller shutter and vibration detectors;
support for Single EOL, Double EOL and Triple EOL configuration (Triple EOL when
working with INTEGRA Plus control panels);
programming end-of-line resistor values.
Tamper contact reacting to the housing opening or detaching from the wall.
RS-232 (TTL) port for updating the keypad firmware.
2. Installation and hook-up
Disconnect power before making any electrical connections.
The INT-KSG keypad is designed for indoor installation. The place of installation should be
readily accessible to the system users. The distance between the keypad and the control
panel may be up to
300 m
. Using the typical unshielded straight-through cable is
recommended for making the electrical connections (it is not advisable to use the "twisted-
pair" type of cable – UTP, STP, FTP).
If you use the twisted-pair type of cable, remember that the DTM and CKM (data and
clock) signals must not be sent through one twisted-pair cable.
1. Open the keypad housing (see Fig. 1).
2. Pass the cables through the opening in the housing base.
3. Secure the housing base to the wall.
