12 ACU-250
SATEL
APMD-150
– wireless dual motion detector. The following is to be programmed:
peration in test mode.
r. The following is to be programmed:
AR
AT
etector. For both positions occupied by detector, the
e rises above the defined temperature
ill be triggered) or low (when the temperature drops below the defined
value, alarm will be triggered);
ctor and magnetic contact. The following is to be
sensitivity of PIR sensor;
sensitivity of microwave sensor;
the way of o
APD-100
– wireless passive infrared detecto
sensitivity,
option of immunity to pets up to 15 kg.
D-100
– wireless reorientation detector. Sensitivity is to be programmed.
D-100
– wireless temperature d
temperature threshold parameters can be programmed (thus two different temperature
threshold can be programmed):
threshold type: high (when the temperatur
value, alarm w
temperature
temperature;
tolerance.
AVD-100
– wireless vibration dete
programmed:
active reed switch [first zone];
sensitivity of vibration detector (registering a single vibration meeting the sensitivity
criterion will cause alarm) [second zone];
the number of pulses which, if registered by vibration detector will cause alarm (the
pulses need not meet the sensitivity criterion) [second zone].
Working parameters of the vibration detector are independently analyzed. The
detector can trigger alarm after registering a single, strong vibration caused by
a powerful impact, and also on registering several slight vibrations caused by a series
of weak strikes.
ASP-105
– wirelessly triggered outdoor siren. The following is to be programmed:
type of acoustic signaling;
maximum duration of acoustic signaling.
ASP-205
– wireless indoor siren. Signaling parameters can be programmed for both
n (thus allows to program two different signaling types):
naling;
ling option.
g mode can be
he INTEGRA / INTEGRA Plus system
positions occupied by the sire
maximum duration of sig
type of acoustic signaling;
optical signa
ASW-100 E
/
ASW-100 F
– 230 V AC wireless controller. Operatin
programmed.
8.2 Programming in t
8.2.1
D
LOAD
X
program
You can program the wireless devices in the "Structure" window, "Hardware" tab, after
clicking on the controller name in the list of devices (Fig. 3). Before making any changes,
click on the "Read" button, and after making the changes – on the "Write" button (the data
