2 ACCO-NT
SATEL
1. Introduction
The ACCO NET access control system consists of software and devices manufactured by
Satel. The guide to ACCO NET system software installation is available on the www.satel.eu
website.
This manual covers installation of the ACCO-NT access control panel (electronics version
1.7, firmware version 1.10). It also describes the rules for configuring the control panel
network settings by using the ACCO-NT Conf program and the way of installing the devices
which make up the ACCO NET access control system. These include:
access control modules (firmware version 3.00 or newer):
ACCO-KP,
ACCO-KP-PS,
ACCO-KPWG,
ACCO-KPWG-PS.
expansion modules:
INT-E,
INT-O,
INT-PP,
INT-RX-S (firmware version 1.02 or newer),
INT-ORS,
INT-IORS.
2. Features
System structure
Any number of objects in the system.
Any number of access control panels in the object (the number of devices is only limited by
server performance).
Up to 255 access control modules supported by the access control panel.
Up to 255 zones in 1 access control panel.
Up to 255 access control modules in 1 zone.
Up to 16 access pathways.
Up to 16 zones in 1 pathway.
Up to 8 INTEGRA or INTEGRA Plus alarm control panels integrated with 1 access control
panel.
You can integrate INTEGRA / INTEGRA Plus control panels, firmware version 1.17 (or
newer).
Inputs
8 programmable inputs on control panel mainboard:
digital mode (NO, NC),
different input types.
Maximum number of programmable inputs: up to 264.
