SATEL ACCO-NT
17
control panel and communication on control panel board will start flashing. When the MAC
number of control panel reappears in the program window, the device will be identified in
the system. Disconnect the control panel from the computer.
9. Now you can start programming the system.
10.2 Remote update of the control panel firmware
You can update the control panel firmware remotely from the ACCO Soft program. For
description of the remote update procedure, please refer to the program manual.
10.3 Emergency procedure of the control panel firmware update
If the process of control panel firmware replacement fails, follow the procedure below:
1. Power off the control panel.
2. Disconnect the wires connected to CK and DT terminals of control panel.
3. Short together the control panel CK and DT terminals.
4. Power on the control panel. All LEDs will come on for 2 seconds, and then only the PWR
LED will come on steady.
5. Open the control panel CK and DT terminals.
6. Start the program for updating the control panel firmware and update the control panel
firmware according to the procedure described in section “Control panel firmware update”.
11. Specifications of ACCO-NT control panel
Number of programmable inputs ............................................................................................. 8
Number of outputs:
low-current, OC type ............................................................. 8
high-current,
power supply .................................................... 3
Supply voltage ................................................................................................... 12 V DC ±15%
Standby current consumption ........................................................................................100 mA
Maximum current consumption......................................................................................140 mA
OC type outputs.............................................................................................. 50 mA / 12 V DC
+EX output........................................................................................................ 0.5 A / 12 V DC
AUX outputs (total) ........................................................................................... 0.5 A / 12 V DC
Supported memory cards.........................................................................microSD, microSDHC
Environmental class................................................................................................................. II
Operating temperature range...............................................................................-10°C...+55°C
Maximum humidity.......................................................................................................... 93±3%
Electronics board dimensions ............................................................................... 150 x 68 mm
Weight................................................................................................................................. 92 g