Satechi Wireless Mini Router Quick Setup Manual Download Page 2

Page: 2 / 3

MODES

Router: In this mode, the Mini Router is connected to a modem via ethernet cable

and broadcasts a wireless network with the SSID [network name] of your choosing.

Repeater: In this mode, the Mini Router is plugged into an outlet where your existing

wireless signal is weak. The Mini Router will take the existing signal and strengthen

it, increasing the eﬀ ective range of your network. No new SSIDs are created in this

mode; you will need to reconnect to your existing network to use the internet.

Access Point: This mode is used when only an ethernet connection is available. The

Mini Router connects to the internet via ethernet cable and converts the wired signal

to a wireless signal, broadcasting a wireless network with the SSID of your choosing.

Bridge: Bridge mode works like Repeater mode, but will rebroadcast your existing

network with a new SSID of your choosing.

Client: In this mode, the Mini Router converts a wireless internet connection to a

wired connection. If you have a device that has an ethernet port but does not support

wireless connections, you can use the Mini Router as a wireless adapter.

New

SSID

Old

SSID

1. Router

3. Access Point

2. Repeater

5. Client

4. Bridge

Internet

Modem

Router

Summary of Contents for Wireless Mini Router

Page 1: ...g up Once connected to Wireless N in your internet browser navigate to the address 192 168 10 253 If prompted to enter a username and password enter admin in both fields This will direct you to the Mi...

Page 2: ...n only an ethernet connection is available The Mini Router connects to the internet via ethernet cable and converts the wired signal to a wireless signal broadcasting a wireless network with the SSID...

Page 3: ...ee seconds using long counts one one thousand two one thousand etc 2 Release the reset button then immediately press and hold it again until the WPS light on the Mini Router briefly flashes about eigh...