WIRELESS
MINI ROUTER
QUICK SETUP GUIDE
A.
SETUP
Plug the Wireless Mini Router into the wall. After approximately one minute, the
WLAN light on the Mini Router will turn on
—
the Mini Router is now broadcasting a
wireless network called “Wireless-N.” In your computer or other internet-accessible
device, go to your wireless settings and connect to the “Wireless-N” network. To do
this, you may have to disconnect from your current network. If your computer asks
for a PIN or to “set up” your network, click “connect without setting up.”
Once connected to “Wireless-N,” in your internet browser navigate to the address
“192.168.10.253” If prompted to enter a username and password, enter “admin” in
both fi elds. This will direct you to the Mini Router’s settings page.
Click “Wizard” in the left sidebar. You will be directed to the mode select menu. Once
you select a mode, you will be guided through the setup process for that mode. After
mode setup is complete, you will need to disconnect from the “Wireless-N” network
and reconnect to your existing or newly-created network before you can use the
internet. More information about the Wireless Mini Router’s modes can be found in
Section B “Modes” of this Quick Setup Guide.
Wireless-N
1.
2.
3.
User: admin
Pass: admin
