BG0634 REV.A1
ENGLISH
PRO EM235 Quickstart
www.satec-global.com
PRO EM235 Quick Start Manual
This guide instructs the user on installation, wiring, configuring and operating the EM235
multi-meter. This guide does not substitute the full user manual or the detailed safety
instructions.
To download the manual and other related material, please visit our website:
Warning! Only a licensed electrician may perform the installation and wiring
of the EM235.
Figure 1
: EM235 front panel
INSTALLATION
The PRO EM235 is designed exclusively for installation on DIN-rail.
Please note to leave room for future expansion
: when installing a basic unit
(without modules), it is recommended to maintain a minimal gap of 30-100mm to
the right of the unit, allowing future installation of additional detachable SATEC
modules (figure 5; depending on number of added modules, 17.8mm each).
Figure 2
:
Opening the latch
Use a flathead screwdriver to dislodge the unit
from the rail by inserting the screw-driver into the
slit in the latch, pushing the latch downwards. To
install the unit push the latch back upwards.
