8
Copyright, 2010, satconsystem
Pressing POWER ON/OFF button momentarily can switch between reverse and
non reverse image..
Notes for camera:
If the battery is exhausted, please recharge it with the charging cable.
Always keep weatherproof cover fitted regardless of conditions.
CAMERA LED INDICATOR
STATUS
Red on
Charging when Power off
Off
Power off (disconnect with cigarette lighter)/Finish charging
Green on
Power on
Yellow on
Charging when Power on
Notes for receiver:
A full charge will take about 2.5 hours, which can power the receiver for about
4 hours continuously.
You are recommended to have the battery fully charged before its first
installation to optimize its life.
Do not burn or disassemble the Li-battery. !
Do not short-circuit the battery as it may cause fire or electric shock. !
RECEIVER LED INDICATOR
STATUS
Red on
Charging when Power off
Off
Power off (disconnect with cigarette lighter)/Finish Charging
Green on
Power on, working at reverse image
Yellow on
Charging when Power on, working at reverse image
Green flash
Power on working at non reverse image
Yellow flash
Charging and working at non reverse image
Using the Camera
1. Before using make sure the camera is fully charged. Press the camera Power
ON/OFF button to power on your camera.
