background image

 

SATAM                                                                                                                                   Siège Social : Paris Nord II – Bât. Le Gauguin – 47, allée des Impressionnistes 
Usine de Falaise – Avenue de Verdun – B.P. 129 – 14700 FALAISE – France                   B.P. 85012 – Villepinte – 95931 Roissy C.D.G. Cedex - France 
Tél. : +33 (0)2 31 41 41 41                                                                                                      Tél. : +33 (0)1 48 63 02 11  
Fax : +33 (0)2 31 40 75 61                                                                                                      Fax : +33 (0)1 49 38 41 01 
SIRET 495 233 124 000 17                                                                                                    SA au capital de 6 037 000 € – RCS Bobigny B 495 233 124 
CODE APE 2813 Z                                                                                                                 SIRET 495 233 124 000 17 – Code APE  2813 Z – N° TVA : FR 48 495 233 124 

 

 

 
 

 

 

 

MEASURING CHAMBERS – ZC 17-24 

and ZC 17-48 METERS 

-- 

Description – Installation – Operation – Servicing

 

 

 

 

U508113-e– Révision 4 – 29 March 2012 

 

 

 

 

 

 

 

This document consists of 

16

 pages, (including the flyleaf) 

 

This document is the property of SATAM  

And can’t be transmitted to someone also with out prior authorisation 

 

SATAM may modify this document without prior notice 

 

In conformity with the European directive 94/9/CE-ATEX

 

Summary of Contents for ZC 17-24

















Reviews: