SATA SATAjet 4000 B, Operating Instructions Manual

Page: 112 / 426

112
EN
Operating instructions SATAjet 4000 B RP/HVLP
13. Warranty / Liability
The SATA General Conditions of Sale and Delivery and further contrac -
tual agreements, if applicable, as well as the valid legislation at the time
apply.
SATA cannot be held responsible especially in the following
cases:
• When the operating instructions are disregarded.
• When the product is used in other than the intended ways of usage.
• When untrained staff are employed.
• When no personal protection equipment is worn.
• When no original accessories and spare parts are used.
• When the product is manipulated, tampered with or technically modi-
fied.
• In case of normal wear and tear.
• In case when the product has been exposed to untypical shockloads
and impacts during usage.
• Assembly and disassembly
14. Spare Parts [12]
Art.
No.
Description
1826 Pack of 4 anti-drip devices for 0.6 l PVC gravity flow cup
3988 Single pack of 10 paint strainers
15438 Paint needle sealing
19745 Swivel joint G 1/4 a x M15 x 1 for non-DIGITAL spray guns
27243 0.6 l QCC quick change PVC gravity flow cup
49395 Screw-on lid for 0.6 l PVC gravity flow cup
76018 Pack of 10 x 10 paint strainers
76026 Pack of 50 x 10 paint strainers
86843 Air piston rod
133934 Pack of 3 sealings for spindle round/flat spray control
133942 Seal retainer (air side)
133959 Spring set consisting of 3x paint needle and 3x air piston
springs each
133967 Pack of 3 locking screws for SATAjet 4000 B air micrometer
(air flow control knob)