SATA Air regulator belt, Operating Instructions Manual, Page: 47 / 166

47
Operating instructions SATA air regulator belt Operating instructions SATA air regulator belt
EN
1.2. Applicable directives, regulations and standards
REGULATION (EU) 2016/425
Personal Protection Equipment
German Ordinance on the Use of Personal Protective Equipment(P-
SA-BV)
Regulation covering safety and health protection while using
personal protection gear during work
Directive 2014/34/EU
Devices and protection systems for intended use in explosion hazard
areas (ATEX).
DIN EN 14594 Class 3B
Breathing protection devices – Compressed air tube devices with continu-
ous air volume flow.
2. Safety Instructions
Before using the PPE breathing protection equipment, every user is
obliged to check the capacity of the air supply system, possibly also in
terms of the impact on other users of the system.
The code "H" indicates that the compressed air feed tube is heat-resist-
ant. The code "S" indicates that the compressed air feed tube is antistatic.
Before operation, the user must proceed with a risk assessment regarding
possible harmful components in the workplace, e.g. nitrogen.
■ Replace/do not use defective belts.
■ Send defective belts to SATA for repairs.
■ Do not modify the belt.
3. Intended Use
The belt is part of the breathing protection apparatus. It holds the air reg-
ulator and the optional breathing air humidifier. The belt is worn round the
hips.
4. Description
The belt is part of the breathing protection apparatus. It holds the air regu-
lator and the optional breathing air humidifier. It consists of the main parts:
■ Fabric belt [2-1]
■ Buckle [2-4]
■ Two padded adapter plates [2-3] , [2-5]
■ Belt loop for breathing air hose
[2-7]