![background image](http://html.mh-extra.com/html/sata/air-check-set/air-check-set_operating-instructions-manual_1200246029.webp)
29
EN
Operating instructions SATA air check set
Operating instructions SATA air check set
6. Technical Design
[3-1]
Air check set
[3-2]
Cylinder base
[4-1]
Pressure gauge
[4-2]
Connection nipple
[4-3]
Air pressure control button
7. Technical data
Description
Recommended inlet pressure
3.0 bar - 4.0 bar
Max. inlet pressure
10.0 bar
Recommended test pressure
0.8 bar
Max. test pressure
1.6 bar
Air consumption
150 Nl/min at 0.8 bar
Test duration
10 min.
Max. ambient temperature
50 °C
Weight
490 g
8. Test procedure
Warning!
Risk of injury from bursting compressed air hose
If an unsuitable compressed air hose is use, it can be damaged by too
much pressure and explode.
→ Only use solvent-resistant, antistatic and technically flawless hose
for compressed air with permanent pressure resistance of min. 10 bar,
bleeder resistance of < 1 MOhm and min. inner diameter of 9 mm
(# 53090).
Attention!
Distorted results caused by damaged test membrane
If the test pressure is too high, this can damage the test membrane and
distort the results.
→
Comply with the max. tolerable test pressure (see chapter 7).
Note!
To avoid distorted results, always work with great care and cleanliness
when inserting the test membrane and during the test procedure. Always
use the supplied tweezers to insert the test membrane.
Summary of Contents for air check set
