![background image](http://html.mh-extra.com/html/sata/ae5851/ae5851_user-manual_1200244009.webp)
ES
PT
JA
RU
EN
DE
KO
AE5851
9
Operating instruction for air operated tire spreader:
Product No.
AE5851
Product name
Air Operated Tire Spreader
Applicable tire width (mm)
145-275
Working pressure (bar)
6-10
Voltage (V)
AC220
Power (W)
55
Working temperature (
°
C)
-10-60
℃
Net weight (KG)
83.5
Gross weight (KG)
86
Carton dimension (cm)
169
×
71
×
27
Please inspect the product immediately after unpacking, and ensure that it is intact. If any component is lost or damaged, please call the
customer service department of SATA Automotive Technology (Shanghai) Co., Ltd.: 400-820-3885, 800-820-3885
Please write down the product serial number:___________________
Note: If no serial number is available, please write down the date of purchase.)
Please keep this Manual properly:
1)As this Manual covers safety warning, installation and operation, maintenance, common fault troubleshooting, etc. of the product, please
properly keep it.
2)Please write down the serial number (or date of purchase) of this product on the first page of the Manual, and keep it in a dry and safe
place for reference.
3) Please use the product correctly on the basis that you have fully understood the information contained herein.
4) The equipment has been covered by product liability insurance.
Safety warning:
1) This product is only designed for spreading tire or repairing the outer protective cover for a tire indoor.
2) Do not use this product for other purposes to avoid personal injury.
3) Check the fasteners on the tire spreader for looseness before operation. If necessary, retighten them.
4) Please keep it away from heat and fire sources, as high temperature may damage the product and air pipes.
5) Compressed air is only allowed to be supplied to the product after passing through the oil-water separator to extend its service life.
6) Please use the tire spreader after secure it on a flat, level, dry and reliable plane.
7) Do not disassemble the cylinder or foot valve of this product by yourself. Please contact professional if any repair is needed.
8) Keep the spreading hooks and hook claws dry and clean before use in order to avoid the danger of spreading hook sliding caused by oil
or foreign matter.
9) It is recommended to reasonably maintain the equipment by professional personnel with maintenance qualification. The genuine parts
shall be used for the necessary replacement.
10) Please wear safety shoes, goggles and working gloves conforming to relevant national safety regulations during operation, and SATA
products are recommended.
11) It is not allowed to use this product after drinking and in case of debilitation, inattention, drowsiness due to drugs and unconsciousness.
Warning: The Notes, Warnings, Tips in this Instruction cannot cover all possible conditions.
The operator shall understand that careful operation and professional knowledge are indispensable to operation of this product.
AE5851 气动扩胎机-8国-200615.indd 9
AE5851 气动扩胎机-8国-200615.indd 9
2020/6/23 19:30:43
2020/6/23 19:30:43