SATA AE5806, User Manual

Page: 18 / 82

18
AE5806 ES PT JA RU EN DE KO
中文
- For AGM lead-acid batteries: Select AGM mode.
- For gel-based lead-acid batteries: Select GEL mode.
3.3 Display function:
- The display only shows the voltage when the charger is not working.
- The charging voltage and charging percentage are displayed during charging, and the content displayed can be changed using the display
mode button.
- When the battery is fully charged, the
“
Charging
”
indicator goes out and the
“
Full charged
”
indicator lights up.
- Note: The
“
V
”
LED will light up when the voltage is shown in the digital display. The
“
%
”
LED will light up when the charging
percentage is shown in the digital display. The
“
V
”
and
“
%
”
LEDs will not light up in boost mode.
3.4 Charging:
- Connect the charger and battery in the correct manner. Refer to Sections 2.2 to 2.5 in Chapter II.
- Connect the charger to an AC power socket.
- Set a suitable charging voltage and battery type according to the battery model.
- Set a suitable charging current which will directly displayed on the charger.
- Press the Start/Pause button to start charging.
- When charging is complete, press the Start/Pause button to stop charging, then disconnect the plug from the AC power socket and follow
the reverse order of connection.
Note:
- In extremely cold environments, if the battery is lower than 1.5V, charge the battery for five minutes before starting
the engine. If the first startup fails, wait for at least 5 minutes before another start.
Note:
- Please read the safety operation specifications carefully before using the charger. Otherwise, the battery may be
damaged. In serious cases, it may cause personal injury or death.