![background image](http://html1.mh-extra.com/html/sata/98103/98103_user-manual_1200218006.webp)
中文
EN
DE RU KO PT
JA
ES
98103
6
Digital Tire Inflator:
High-precision tire pressure measurement
High-brightness LCD backlight
Stainless steel braided air hose
Rust-proof and durable copper connector
Operation Instructions:
1
)
Remove the valve core cap, connect the inflation chuck to the valve core, and ensure no air leakage.
2
)
Tire pressure detection: the measured in-tire pressure will be displayed once connected without the need to press the trigger.
3
)
Inflating operation: hold the trigger, and the inflator will inflate the tire.
4
)
Deflating operation: Press the trigger halfway, and the tire will be deflated via the inflator.
5
)
Energy-saving mode: the inflator will automatically shut down after 90 seconds not in use.
6
)
Press the operation button to turn on the backlight, and the backlight will automatically turn off after 10 seconds.
7
)
Press and hold the operation button for 3 seconds to set different units of measurement
(
BAR/ PSI/ KPAV/KGF
)
.
8
)
Frequent use of the backlight will reduce the battery life. Please change two AAA batteries if needed.
9
)
Working Pressure 0-12 Bar, with the reading accuracy of 0.01Bar and maximum inlet pressure of 15Bar.
Important:
1
)
To prevent personal injury, do not point the inflation chuck to any part of the body.
2
)
Oil-water filter cotton should be changed based on actual usage. It is recommended to change every six months.
3
)
SATA reserves the right to change the technical specifications of the product without prior notice.
Instruction for changing batteries:
1
)
Separate the soft rubber guard.
2
)
Remove the battery cover.
3
)
Change the batteries.
4
)
Restore the battery cover and guard.
Schematic diagram for replacing the oil and water filter cotton:
1
)
Unscrew the connector with a 14mm wrench.
2
)
Remove the filter cotton and replace it.
Summary of Contents for 98103
Page 2: ......
Page 27: ...No Date ...