SASSOON VSS2068A, Instruction Booklet

Page: 10 / 20

FRIZZ DEFENSE SALON STRAIGHTENER
10
OPERATING INSTRUCTIONS
Wash, condition & dry your hair as normal.
Ensure your hair is combed through & tangle-free.
1. Plug your straightener into a 240V suitable power outlet & place
on a heat protective, flat level surface.
2. Press the I/0 button to turn your straightener on.
3. The LCD screen will turn on & start to flash on the 185°C setting.
4. Press the ‘+’ or ‘-’ button to adjust to your desired temperature
indicated on the LCD display. Once the temperature you have
selected has been reached, it will then stop flashing on the
display.
5. Divide your hair into 4 sections (2 back & 2 front).
6. Starting with the back sections at the nape of the neck, take a
horizontal section no wider than the plate of the straightener
& clamp the plates over the section then glide down slowly &
evenly.
7. Repeat this through all sections.
8. After use turn your straightener off by pressing the I/0 button
until the LCD display turns off.
Allow straightener to cool before storing.