6
Getting Started
§
Unpack the scale carefully�
§
After unpacking the equipment, inspect the device
immediately for any visible damage that may have
been caused by rough handling during shipment�
Package Contents
– Scale
– Load plate
– Adapter cable
Setting up the Scale
Choose a suitable location where your scale will not
be exposed to drafts, heat radiation, moisture or
vibrations�
Make sure that you read these operating instructions
carefully before connecting the scale to the power
supply�
!
Observe all warnings and safety precautions�
!
Caution
The scale must be grounded before installing
the device in a Zone 2 hazardous area� Root the
grounding wire (cross section 4mm² in minimum)
through the eyelet� Connect the cable to the
grounding terminal (11); see illustration�
§
Place the load plate on the scale�
°C