Sartorius MC 5, Service Manual

Page: 14 / 49

14 SARTORIUS MC 5 Balance Stand 1/94
MC 5
Additional Service Tools and Equipment
To service and repair the microbalance, set it up in a clean, stable work area that is free of vibrations and
drafts, and use the appropriate tools.
In addition to your regular tools, you will need the following special tools to work on the SARTORIUS
MC5 Microbalances:
No. of Units/Set Designation Order No.
1 Digital voltmeter, 4 ½ digits (e.g., Beckmann) 6738-62
1 2-channel oscilloscope, 20 MHz
1 Constant voltage source (e.g., Analogic AN 3100)
Weights and weight sets required:
1 E1 weight set if a PSION or a PC CAS prg. is not available
1 E2 weight set if a PSION or a PC CAS prg. is not available 6713-001
1 Weight, 1 g, E1
1 Weight, 5 g, E1
Caution!
Do not attempt to repair mechanical system; return microbalances with mechanical defects to our
International Service Headquarters in Goettingen, Germany.
To repair SARTORIUS MC5 Microbalances, considerable experience, completion of the
microbalance service course in Goettingen, Germany, and all special tools are required. Repair
attempts by non-authorized persons must therefore be avoided. Repair of balances by anyone other
than an authorized SARTORIUS service technician will result in the loss of all warranty coverage.
Accompanying Literature
The Sartorius Micro Instruction Manual, publ. no. WMC6011-e93091, contains these sections:
Installation Instructions
How to Operate the Balance
Balance Operating Menu
Application Programs
Interface Description
Specifications