Operation
Basic Weighing Function
Features
– Zeroing the balance
You can zero the balance within the
entire weighing range, up to the maxi-
mum capacity.
Preparation
§
Switch on the balance: press the
e
key
§
If necessary, zero the balance: press the
(Zero) key
$
If necessary, change the configuration
settings:
see the chapter entitled “Configuration”
$
If desired, load the factory settings:
see the chapter entitled “Configura-
tion,” menu item 9.– 1
Additional functions:
$
Switching off the balance: press the
e
key
$
Battery operation: automatic shut-off
after 2,5 or 10 minutes; see chapter on
configuration. Example: 2 minutes.
If the weight readout remains
unchanged and no keys are pressed for
at least two minutes, the battery symbol
“
“ starts flashing. After another
2 seconds, the balance shuts off auto-
matically, unless a key is pressed.
Description of the Keys
e
switches the balance on and off or
switches it to the standby mode.
Battery operation: on; turns
backlight on; off
(Zero)
Zeros the balance; press and hold
2 seconds: opens the application
menu
(Cal)
Starts calibration/adjustment
(F)
Starts an application program;
Scrolling in application menu,
configration menu and calibra-
tion menu
(Enter)
Confirms the selected setting;
Exits application, configuration &
calibration menu if key is pressed
and held for more than 2 seconds.
(Print)
Generates a printout or data
output
8
8
PK Elektronik Vertriebs GmbH, E-Mail: [email protected], Internet: www.pkelektronik.com