24
External Calibration
Settings:
Calibration/adjustment mode: External calibration/adjustment (menu code
1 9 1
)
The weight required for calibration/adjustment is defined in the factory settings
(see “Specifications").
Step
Key (or instruction)
Display
1. Zero the balance.
(TARE)
0.0
g
2. Start calibration.
(CAL)
+
5000.0
g
CAL
G
3. Apply the prompted calibration
weight (in this example, 5000 g).
4. The balance is calibrated
–
0.2
g
(displayed only if menu
CAL
±
G
code
1 10 2
is set).
5. If the “Calibrate, then auto
Adjust
*
adjust" setting is selected
CAL
(
1 10 1
), the balance is now
adjusted automatically.
6. The calibration/adjustment
CC
sequence is completed.
CAL
7. After calibration/adjustment, the
+
5000.0
g
weight is displayed with weight unit.
8. Remove the calibration weight.
0.0
g
*
Adjust
shown only if menu code
1 10 2
is set.
Important note: Afterwards, do not perform internal calibration/adjustment again.
