7
Stand 08/2017 MK | B+ÜGB 02/2018 TM
Stand 08/2017 MK | B+ÜGB 02/2018 TM
GENERAL INFORMATION
• Before the first start-up, read these operating instructions carefully and observe the information
given therein.
• Keep these operating instructions within easy reach, near the device.
• The manufacturer/dealer cannot be held responsible for damage caused by non-observance of these
operating instructions.
• If these operating instructions are not observed, the safety of the device is no longer guaranteed.
• If the device is passed on to third parties, these operating instructions must be supplied with the
device.
• This equipment must not be operated by children or persons with reduced physical, sensory
or mental abilities, as they cannot recognize the dangers of using electrical appliances and/or
refrigerators and as accidents, fires, explosions or damage to property may occur.
• Do not use the device outdoors in rain or in wet rooms.
• After unpacking the device, make sure that everything is in perfect condition. If you discover any
damage, do not connect the device but contact your dealer.
• Check that all components listed in the scope of delivery are present. If this is not the case, contact
your dealer.
• Keep the unit‘s packaging. The device can only be transported safely in its original packaging.
• Please note that all components of the packaging (plastic bags, cardboard, polystyrene parts, etc.)
may endanger children and must therefore not be stored near them.
• If it is not possible to store the packaging, separate the various packaging materials and return them
to the nearest collection point for proper disposal.
• Place the unit in a dry and adequately ventilated place.
• Ensure that there is a minimum distance of 10 cm between the back of the refrigerator and the wall.
Otherwise, the desired cooling capacity can no longer be guaranteed.
• Do not place the unit near heat sources such as heating, stove, oven or open fire or in direct sunlight
as the desired cooling capacity can no longer be guaranteed.
• The ventilation slots must always be kept clear and must not be covered or closed.
• Before connecting the device to the power supply and putting it into operation, clean the device
thoroughly.
• Do not drill or pierce holes in the inside or outside of the unit. The cooling circuit could be damaged.
• For hygienic reasons, daily cleaning is recommended.
• The device is neither suitable nor intended for the storage of medicines or highly inflammable,
flammable or explosive substances.
