SARK
SARK
SARK
SARK-
-
-
-110
110
110
110
User’s Manual
Rev 1.2.6 October 3
rd
, 2015
- 58 -
© Melchor Varela – EA4FRB 2011-2015
Select the file name and press [
●
] or
select [
▲
] when the results are not to be
saved in a file
Enter the operating frequency
After some seconds the results are
shown on the screen.
A screenshot can be captured by
selecting [
●
]
The figure below describes the measured parameters:
The internal procedure performed by the analyzer is as follows: the analyzer measures the
impedance at 1 MHz and at the desired operating frequency. Then it searches for the self-
resonant frequency and measures the impedance at this point. The following parameters are
extracted from these measurements:
