Installation Instructions
Mortise Lock
IN100 Series
22 1-800-810-WIRE • www.sargentlock.com • A8190E
Copyright © 2016, 2020-2021, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
1-800-810-WIRE • www.sargentlock.com • A8190E 23
02/28/21
Lock BUSY indicates lock is processing a card (such as a key configuration card for online SE processor or offline
void list card with many entries). Card should be kept in close proximity to reader until end of process. Lock BUSY
indication does not cancel or overwrite any other indications. Indications related to access permissions or setup
card processing are still present.
Indication scheme is described by figures below:
11
Lock Busy LED Indications
1.5 second delay
Continuous yellow flash (.1s every 1 sec)
Card detected
Lock BUSY indication
1.5s
Audit trail card
with lock busy indication
Card detected
Lock BUSY indication Mixed with Scenario for Offline Audit Trail Card
1.5s
Card
detected
Card
success
Lock BUSY
indication
BLE access
Card detected
Online BLE Access
1.5s
BLE
success
Lock BUSY
indication
Online SE Keys Setup Card
Config card processed
Ten yellow flashes
(.125 seconds every .125 seconds)
Card presentation start
*
1.5s
Yellow flashes
(.1seconds every .9 seconds until read is completed)
*Introduced with firmware version 3.8 - in prior firmware versions
only “Config card processed” LED indication is displayed.
