2 Quick Start Guide
2.1 Mount the SR-AX100 on your camera’s hot shoe
2.2 Connect the supplied signal transmission line from the output jack of the
adapter to the MIC input of DSLR camera or camcorder.
Note:
Please switch off the AGC function of your camera or camcorder.
2.3 Mount self-powered camera microphones or wireless mics on the top or sides
shoes of the adapter.
2.4 Connect mono mics to the corresponding LEFT or / and RIGHT inputs on the
adapter.
Connect stereo mics to the STEREO input.
2.5 Set the M/S switch.
When using one channel, switch to M for mono. When using two channels, switch
to S for stereo.
2.6 In case of any distortion, you should initially set the LEFT and RIGHT trim
controls fully clockwise. When recording, you could adjust the knobs flexibly to
get the the optimum signal levels.
2.7 If your camera has a headphone jack, you can plug headphone into the
headphone terminal on the camera to monitor the audio.
Stereo Input
Stereo
Output
Cold Shoe
Lock Knob
Mono
Input
