sarahellison.com.au
page 3 | 8
STEP 3
STEP 4
Align holes on Metal Leg support with the corresponding holes on the
Ball Feet as shown. Secure the Metal Leg Support using JF bolt Screws
(H-8). Repeat this step to assemble the remaining three Ball Feet.
Align holes on the Ball Feet with the corresponding holes on the Bed
Frames as shown. Secure the Ball Feet using extra short bolts screws
(H-4) and spring washer (H-5). Once all bolts have been inserted, fully
tighten all bolts using allen key (T-1).
