sarahellison.com.au
page 2 | 8
STEP 1
STEP 2
On a flat protected surface, lay frame A and B upside down. Align the
wooden dowels to connect the frames as shown. Secure both frames
using the medium bolt screw (H-2), spring washer (H-5) and flat washer
(H-6). Tighten all bolts by hand but do not fully tighten them at this
stage.
Align the holes on the Metal Frame with the corresponding holes on the
Bed Frame as shown. Secure the Metal Frame using short bolt screw
(H-3) and spring washer (H-5). Tighten all bolt by hand but do not fully
tighten them at this stage.
