2
Mark the position on the wall ready for mounting; drill suitable holes,
insert the rawl plugs and secure the control box using the screws
provided.
Secure and tighten the flexible hose from the tap connection to the
solenoid outlet.
Attached the other flexible hose provided to the inlet connection on the
solenoid valve and tighten to form a seal.
This flexible hose should be connected to the water supply pipe.
The mains version is designed to take a 230V mains power supply
and convert it using the internal transformer to a 6V supply. The mains
power cable should have the live and neutral connected into a fused
spur.
Please note the control box is double insulated.
The battery version
comes supplied with 4
x AA batteries, ensure
these are placed in
the battery box and
re-secure with the
screws. Please note:
The mains version is
supplied with a battery
back-up, incase of a
power failure.
Secure the cover onto
the control box using
the screws provided.
Connect the signal wire
to the sensor wire from
the tap.
Ensure both the wires for the battery and the
mains power supplies (if applicable)
are connected.
Deck plate
Wash basin
Plastic cushion
Faucet spout
Sensor
Deck plate
Wash basin
Signal wire
Power cable
Control box
Water inlet
Hose
Sealing nut
Hose
Lock washer
Nut
Fixed shank