Your Sapphire Spa is manufactured
from the highest grade acrylic material
available. To ensure that it keeps its
finish for many years, a small amount
of maintenance is required periodically.
General cleaning
Acrylic is very easy to clean and
generally stains and dirt will not adhere
to the surface, however you may wish
to wipe down the acrylic surface with
a soft, damp cloth/sponge and a
non-abrasive cleaner (ex. Methylated
spirits) after use or during your normal
maintenance program.
Stubborn marks
For more stubborn marks, your should
consult your Sapphire Spa dealer for
advice on a recommended acrylic
surface cleaner.
Crazing
May occur in acrylic surface as fine lines
when spa is exposed to extremely high
temperatures even with cover on.
These are non structural and not covered
under warranty.
Surface scratches
You may also experience surface
scratches caused by general wear
and tear. If so, it is strongly
recommended that you consult your
Sapphire Spas dealer before attempting
to remove them using the following
method. Apply car polish or a similar
product and lightly rub out the scratch
in a circular motion.
Sunlight & UV exposure
Do not expose the acrylic shell to direct
sunlight or UV for any prolonged period
as this may have a detrimental effect on
the surface and possibly void warranty.
Dirt & sand
Avoid allowing dirt and sand, caused
by bathers entering the spa, simply by
placing a mat or footbath in the entry
areas of the spa. This will assist in the
easier maintenance of the acrylic surface.
Cedar cabinets
If you have chosen a cedar cabinet
for your spa, you can rest easy knowing
it has been engineered and designed
withthe highest grade 20mm western
red cedar available and has been
treated with premium grade, mould
resistant stain.
Regular treatment of the cabinet will
enhance the natural look of the cedar
and ensure that your spa will always
be the centre piece in its location for
many years to come.
Consult your dealer for the ideal product
to stain and protect your cabinet.
To treat your cabinet you will need to
lightly sand the timber, then apply a good
even coat of stain. Small marks and
scratches can be treated the same way.
Your cabinet life will depend on how
you choose to maintain it and harsher
conditions will determine how often the
timber requires treatment.
If you notice the cedar losing its richness
of colour, it may be time for a treatment.
Sapphire Spas recommend treatment
after 6 months of usage,
and then periodically every 12 months.
Duratek cabinets
Duratek cabinets must be washed down
with a soap and water
solution every 6-12 months.
surface cleaning
acrylic
maintenance
general
Owners Manual
|
21
20
|
Owners Manual
Summary of Contents for myHotTub
Page 1: ...Spaownersmanual ...
