8
© 2021 SAPPHIRE
SAPPHIRE Ice Machine Operator’s Manual
INSTALLING
THE UNIT
3
!
WARNING
Fire/Explosion Hazard
DO NOT install in spaces containing gasoline engines, fuel tanks or fuel line fi ttings. This
device does not meet federal requirement for ignition protection.
IMPORTANT:
Plumbing and Electrical Tips
•
A licensed plumber must install this appliance.
•
This appliance must be installed with all electrical and water connections in accordance with state
and local codes.
•
This unit requires a standard electrical supply properly grounded in accordance with National
Electrical Code and local codes and ordinances.
•
The fuse (or circuit breaker) size should be 15 amperes for 115V.
•
The manufacturer recommends that you provide a separate circuit that services only your
appliance. Use receptacles that cannot be turned o
ff
by a switch or pull chain.
•
Plug the appliance into a grounded three-prong outlet. Do not remove the grounding prong, do not
use an adapter, and do not use an extension cord.
•
Do not kink, pinch or damage the power supply cord between the ice machine and wall or cabinet.
•
Before connecting the ice machine to the power source, let it stand upright for approximately 4
hours. Following this step will reduce the possibility of a malfunction in the cooling system brought
on by handling during transportation.
•
Make sure to install on level surface and ensure drain line and waterline are not kinked.
