~ 34 ~
controller. ‘Auto’ uses default values: for a Root port it is 100ms, for a Hub port
the delay is taken from Hub descriptor.
Options: Auto, Manual.
Device power-up delay in seconds
This item is used to set a wait time in seconds for device power-up delay.
Options: 1 ~ 40.
Network Stack Configuration
Network Stack
This item is used for network boot in UEFI mode.
Options: Enabled, Disabled.
Ipv4 PXE Support
This item is used to enable or disable the Ipv4 PXE boot support. If disabled,
Ipv4 PXE boot option will not be available.
Options: Enabled, Disabled.
Ipv4 HTTP Support
This item is used to enable or disable the Ipv4 HTTP boot support. If
disabled, Ipv4 HTTP boot option will not be available.
Options: Enabled, Disabled.
Ipv6 PXE Support
This item is used to enable or disable the Ipv6 PXE boot support. If disabled
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Setup
Advanced
Network Stack
[Enabled]
Ipv4 PXE Support
[Enabled]
Ipv4 HTTP Support
[Disabled]
Ipv6 PXE Support
[Enabled]
Ipv6 HTTP Support
[Disabled]
PXE boot wait time
0
Media detect count
1
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Enable/Disable UEFI Network
Stack
: Select Screen
:
Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2:
Previous Values
F3/F9: Optimized Defaults
F4/F10:Save and Exit
ESC: Exit
