~ 9 ~
2-2 Installing Expansion Cards
The mainboard provides
One M.2 Slot E-key with 2230 type with PCIe x1 and USB2.0 for Wifi/BT
One M.2 Slot M-key with 2242/2280 storage type with PCIe x4 for SSD
M.2 E-Key Slot
To install the M.2 wifi/bluetooth card (type 2230) only:
1.
Remove screw&standoff and align
the notch on the M.2 2230 edge
connector with the tab in the slot.
2.
Plug the M.2 2230 firmly into the slot at a
20-degree angle, and until it clicks into
place.
3.
Fasten M.2 2230 onto the nut with
screw&standoff.
M1:
M.2 E-key for
wifi/bluetooth card
M2:
M.2 M-key for M.2 SSD
device
LED1:
When the M.2 SSD device
is functional, this Green
LED is blinking.
LED2:
When the M.2 slot is in
Wifi mode, this Green
LED is on.
LED3:
When the M.2 slot is in
bluetooth mode, this
Green LED is on.
Note:
Recommended torque for the M.2
hold down screws: 1 ~ 1.5lbf.
Key E Slot
22
30
Key E
12 contacts
12 pins
Unit: mm
Note:
The mainboard in the picture is not
actual mainboard, just for reference.
Supported module type: 2230
1
2
20
o
3
