33
Use this item to enable bank memory interleaving.
Channel Interleaving
The optional settings: Disabled; Address bits 6; Address bits 12; XOR of Address bits
[2.:16,6]; XOR of Address bits [20:16,9].
Enable Clock to ALL DIMMs
Enable unused clocks to DIMMS when memory slots are not populated.
Mem CLK Tristate during C3 and Alt VID.
Enable and disable Mem CLK Tri-stating during C3 and Alt VID
Memory Hole Remapping
Enable Memory Remapping around Memory Hole.
DCT Unganged Mode
This allows selection of unganged DRAM MODE (64- bit width).
Auto=Ganged Mode; Always= Unganged Mode.
Power Down Enable
Enable or Disable power down mode.
Page Smashing
S/W control of Page Smashing Mechanism.The optional settings are: Disabled; IC;
DC; Both.
3-12 BIOS Security Features
You can set either supervisor or user password, or both of them. The differences
are:
Supervisor password:
Can enter and change the options of the setup menus.
User password:
Can only enter but do not have the right to change the options
of the setup menus. When you select this function, the following message will
appear at the center of the screen to assist you in creating a password.
ENTER PASSWORD
:
Type the password, up to eight characters in length, and press <Enter>. The
password typed now will clear any previously entered password from CMOS