23
System Time
The time format is <hour><minute><second>.
Onchip SATA 1, 2, 3, 4, 5, 6
While entering setup, BIOS auto detest the presence of IDE devices. This displays
the status of auto detection of IDE devices.
LBA/Large Mode:
The optional settings are Auto; Disabled.
Block (Multi-Sector Transfer):
The optional settings are: Disabled and Auto.
PIO Mode: the optional settings are:
Auto, 0, 1, 2, 3 and 4.
DMA MODE:
the optional settings are Auto, SWDMAn, MWDMAn , UDMAn.
S.M.A.R.T.:
This option allows you to enable the HDD S.M.A.R.T Capability
(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;
Disabled; and Enabled.
32 Bit Data Transfer:
the optional settings are: Disabled and Enabled.
Floppy A
This item is for specific floppy disk drive settings. Select according to the specification
of the floppy disk you use.
System Memory
This item will show information about the memory modules(s) installed.
3-5
Advanced BIOS Features
Quick Boot
Allows BIOS to skip certain tests while booting. This will decrease the needed to boot
the system.
1
st
Boot Device
Specify the boot sequence from the available devices. A device enclosed in
parenthesis has been disabled in corresponding type menu.
Boot Up NumLock Status
The default value is On.
On
(default)
Keypad is numeric keys.
Off
Keypad is arrow keys.