_
English
_
DESCRIPTION OF APPLIANCE AND ACCESSORIES
BLADE ALIGNMENT
•
Your Clipper was carefully examined to ensure
that the blades were oiled and aligned before
leaving our factory.
•
Blades must be realigned if they have been
removed for cleaning or replacement.
•
To realign the blades, simply match the upper and
bottom blades teeth up, point to point. (End of top
blade teeth should be approximately 1.2mm back from
bottom blade. Compare your clipper blade with the sketch);
•
If blade alignment is incorrect, add a few drops of oil to
the blades, turn clipper on for a few seconds, turn off and
unplug. Loosen screws slightly and adjust. Tighten screws
after blade is aligned;
OIL
•
To maintain your clipper in peak condition, the blades should
be oiled every few haircuts.
•
Do not use hair oil, grease oil mixed with kerosene or any
solvent, as the solvent will evaporate and leave the thick oil
which may slow down the blades motion.
Blade lever
ON/OFF
switch
Bottom blade
Top blade
3mm
6mm
9mm
12mm
Comb
Scissors
Oil
Brush
