_
English
_
their safety. Children should be supervised to ensure that they do not play with the
appliance.
•
If the supply cord is damaged, it must be replaced by a manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
•
The heater must not be located immediately below a socket-outlet.
•
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming
pool.
•
WARNING:
In order to avoid overheating, do not cover the heater.
INSTALLATION
The appliance requires no installation it should be used solely as a portable appliance.
Portable appliances are not suitable for use in a bathroom.
OPERATION
•
Turn the thermostat knob (right) in a clockwise direction until it reaches the maximum
setting.
•
Summer service (ventilation only): turn the knob to setting
•
Heating at reduced power: turn the knob to setting
●
(1000W).
•
Heating at full power: turn the to setting
●●
(2000W).
•
Switching off: turn the knob to setting
O
.
REGULATING THE THERMOSTAT
When the room has reached the required temperature turn the right thermostat knob (where included)
in an anti-clockwise direction up to the point where the appliance switches off and not beyond. The
temperature fixed in this way will be automatically regulated and kept at a constant level by the
thermostat.
IMPORTANT SAFETY FEATURES
The heater is fitted with a safety device which will switch off the heater in case of accidental
overheating (e.g. obstruction of air intake and outlet grills, motor turning slowly or not at all). To
reset, disconnect the plug from the power for a few minutes, remove the cause of overheating then
plug the appliance in again.
CLEANING AND MAINTENANCE
Before cleaning always remove the plug from the electrical socket.
Clean the air inlet / outlet grilles frequently.
Never use abrasive powders or solvents.
Switch
Pilot
light
Thermostat
