_
English
_
HOW TO USE
1.
Standby mode:
After powering on, you will hear single buzzing tone and all indicator
lights will be on. After 1 second the light indicators will go off. The power indicator
will come on again and the unit will enter the standby mode.
2.
Starting up:
a)
Press the “ON/OFF” key when in the standby mode, then the appliance buzzes and
the display will show “2000W” which means it starts heating at the power of
2000W.
b)
Press the “ON/OFF” key when in the standby mode, then the appliance buzzes and
the display will show “1200W” which means it starts heating at the power of
1200W.
3.
Power adjusting:
Regulate the power by pressing the “UP” and “DOWN” keys. The
display will show the selected power.
4.
Timer:
Press the “Timing” key after starting up, the timing indicator light is on. The
display will show the time at frequency of 1Hz. The initial time is “0:00” and can be
adjusted by pressing the “UP” and “DOWN” keys. Short press of the “UP” and
“DOWN” keys will change the time by 1 minute, while long press will change the
time by 10 minutes. The longest time setting is 4 hours. The timer will start counting
down 5 seconds after the last key press. In order to clear the timer, hold the “Timing”
key for 2 seconds.
5.
Children lock:
Press the “Children Lock” key, then the appliance buzzes and the
indicator light is on while other keys are all locked. Long press the “Children Lock”
key for 1 second to unlock.
6.
Stop working / shutdown:
Press the “ON/OFF” key to stop operating and return to
the standby mode.
7.
The machine will shut down automatically if no keys are pressed in two hours.
MAINTENANCE & CLEANING
Please unplug the appliance and make sure that the microcrystal board is cool enough for
cleaning.
1.
Please do not wash with water.
2.
Wipe the appliance with a damp cloth and then dry with a clean cloth.
3.
Please keep the microcrystal board and appliance body clean to avoid insects climbing
in and causing short circuit.
TROUBLESHOOTING
Please do not disassemble the machine without authorization to assure personal safety and
avoid damage to the radiant-cooker. If the power line is damaged, it be must be replaced by
the assigned maintenance departments or manufacturer.
Phenomena
Display
code
Handling method
Environment temperature of the
circuit board ≥ 90ºC
Alarm E5
Check if the air outlet is
blocked.
