16
4.
Select “WAN Interface” is Wireless. Choose the network you would like to connect, then select the
encryption type and fill the encryption key. Select your “WAN Access Type” according to your Internet
source, and starts to setup the wireless encryption.
Connecting to an Existing WiFi Router (Public WiFi)
：
It can be configured without Internet.
1.
Open IE browser, type IP 192.168.1.1(P1), or open
“My Network Place”, and click SAPIDO_GR-1733 (P2).
(P1)
192.168.1.1
2.
Fill in default Username and Password
to login(P3).
3.
Please confirm the “Operation Mode” is default Router Mode, and
select “One Button Setup”(P4) on the left menu.
admin
admin
(P3)
(P2)
SAPIDO_GR-1733
(P4)
5.
After the setting is finished, you should see a “change successful” page with a countdown. When the countdown
is completed, your wireless network and security will be active, and you should be able to login immediately with
the new password. However, if an error message shows up, please refresh the page and it will go back to the
entering page. Afterwards, you can access Internet.
