1A. Remove the bath from its carton and place it on a throw rug or other protective floor covering to prevent
damage to the bath or floor.
1B. Position a clean drop cloth or similar material in the bottom of the bath. Be careful not to scratch the surface
of the bath.
1C. Level the bath by turning the leveling feet at the bottom of the tub.
(You will need two persons to mange this task)
1D. Connect the trap to the drain according to the drain manufacturer’s instructions.
1E. Open the hot and cold water supplies and check all connections for leaks.
1F. Fill the bath to the overflow and check for leaks.
Faucet installation on the bath (optional)
2A. Unscrew the bolts at the bottom of the tub using an adjustable key. Then carefully take out the top of the tub
and place it on a throw rug or other protective floor covering to prevent damage to the bath and the floor.
2B. Drill holes for the faucets on the tub at the desired location. Then install the faucets according to the faucets’
manufacturer’s instructions.
Notes:
• You can choose the location of faucet on the tub according to your convenience. But it is not
recommended to install it in the same location of the overflow.
• Verify all pipe connections to ensure no leakage occurs.
2C. Assemble the top of the tub with the skirt, and secure the bolts at the bottom as shown in the illustration.
2D. Connect the faucet hose with hot and cold water supply and check for leaks.
Maintenance
For the daily maintenance, use a wet cloth and a soft liquid cleaner.
Never use abrasive cleaners containing some acetone, chlorine or strong bleach, scrapers, metallic brushes, nor
other objects or the products which can graze or tarnish surfaces.
