User Manual & Datasheet V 2.1
4. After Green LED glows, turn ’CA’ pot slowly anti-
clockwise until Red LED just goes ON.
5. Empty the tank up-to lower level point.
6. Throw the calibration switch ’CAL’ to ’
∆
S’ position.
Red LED glows.
7. Turn ’
∆
S’ pot slowly clockwise until green LED just
goes ON.
8. Throw calibration switch ’CAl’ to ’
∆
S’ position.
CAUTION - Do not move ’CA’ or ’
∆
S’ pot here after.
14
Calibration Procedure For
Fail-Safe Low
•
After following similar instructions 4 (a) to (g) throw
the fail safe select switch ’FSS’ to fail safe ’LO’ po-
sition.
The instrument is now calibrated.Ensure the calibration
is correct by observing the filling and emptying cycle.
15
Customer Support
Thank you for going through the instructions given in
this manual. To further ease the process of installation
and use, we have developed special demo videos which
are hosted on YouTube.
Sapcon’s YouTube channel, SAPCON INSTRUMENTS,
lists all these videos: https://goo.gl/dnxfcz
Should you require further information regarding in-
stallation, use or working of the instrument, please don’t
hesitate to contact us. Kindly provide the following in-
formation at the time of contacting:
•
Instrument Model and Serial Number
•
Purchase Order Number and Date of Purchase
•
Description of the query
•
Your contact details
In an attempt to serve you better, we are open seven days
a week (9:30am to 7:30pm). We are available at:
•
•
•
+91-731-4757575
Sapcon Instruments Pvt.Ltd.
R
10
